1. GRIPTAPE: OVERALL INFORMATION

Griptape is a kind of emery or sandpaper that is put to the top of a skateboard deck to provide traction. It provides you with stable footing and enables you to do a variety of maneuvers.
WHAT ARE THE COMPOSITES OF GRIPTAPE?

Its rough surface, which is commonly made of silicon carbide, creates resistance and friction between the deck of your skateboard and the bottoms of your shoes when skating and skiing. It would be incredibly difficult to lift your deck into the air if there was no friction.

Griptape is available in a variety of colors and designs, including various printing and graphics, company logos, and even little cut-outs. Given the rising number of decks being released with more sophisticated graphics and patterns, transparent griptape is becoming increasingly popular.

A normal sheet of griptape is 9 inches by 33 inches (22.8 centimeters by 83.8 centimeters), making it ideal for practically all decks. Additionally, there are bigger sheets available with various degrees of granularity to accommodate broader decks and longboards. Use of ultra-rough longboard griptape for conventional skating, on the other hand, should be avoided unless you want to spend your money on a new pair of shoes every week.

2. GRIPTAPE: WEAR & TEAR, SUBSTITUTION, CLEANING

Griptape wears off over time as a result of the persistent contact between its surface and the bottom of your shoes, gradually but steadily flattening the grain. With each wear and tear on your griptape, tricks will become more difficult and inaccurate. Don't be alarmed; this does not imply that you must purchase a new deck of cards right now. A fresh roll of griptape may frequently do wonders.

The most effective method of removing worn-out griptape is to use a hair drier. Due to the heat, the adhesive is liquefied, making it possible for the griptape to be easily peeled off. Then you can simply add another layer of grip tape to finish the job.

You should constantly make sure that your shoes are clear of dirt and filth before skating in order to maintain your griptape in excellent condition. Without doing so, the griptape will be ground into the surface, not only creating unattractive markings but also decreasing the resistance and friction. If you do wind up with filthy griptape, you may gently clean your board using a shoe brush or a home cleaning brush that you are already familiar with. Just ask your parents; there's certain to be one lurking around someplace in your home at this point.

3. APPLICATION OF GRIPTAPE TO THE DECK AND PREVENTION OF BUBBLES

When applying your griptape, it is important to apply the sheet in tiny increments in order to prevent creating bubbles. This will prevent air from being trapped between the griptape and the deck. If, despite your efforts, little bubbles appear, you may easily remedy them by piercing a small hole in the bubble with your griptape cutter, enabling the trapped air to escape.

It is also possible to apply an anti-bubble grip tape if all of this sounds a little too difficult for your liking. In this instance, constant perforation in the griptape guarantees that no bubbles may develop throughout the application process. It is quite easy for extra air to escape between the deck and griptape due to the little holes in the tape that have been created.

Other Post:

How heavy is a skateboard?

How to skateboard uphill?

1. GRIPTAPE: OVERALL INFORMATION

Griptape is a kind of emery or sandpaper that is put to the top of a skateboard deck to provide traction. It provides you with stable footing and enables you to do a variety of maneuvers.
WHAT ARE THE COMPOSITES OF GRIPTAPE?

Its rough surface, which is commonly made of silicon carbide, creates resistance and friction between the deck of your skateboard and the bottoms of your shoes when skating and skiing. It would be incredibly difficult to lift your deck into the air if there was no friction.

Griptape is available in a variety of colors and designs, including various printing and graphics, company logos, and even little cut-outs. Given the rising number of decks being released with more sophisticated graphics and patterns, transparent griptape is becoming increasingly popular.

A normal sheet of griptape is 9 inches by 33 inches (22.8 centimeters by 83.8 centimeters), making it ideal for practically all decks. Additionally, there are bigger sheets available with various degrees of granularity to accommodate broader decks and longboards. Use of ultra-rough longboard griptape for conventional skating, on the other hand, should be avoided unless you want to spend your money on a new pair of shoes every week.

2. GRIPTAPE: WEAR & TEAR, SUBSTITUTION, CLEANING

Griptape wears off over time as a result of the persistent contact between its surface and the bottom of your shoes, gradually but steadily flattening the grain. With each wear and tear on your griptape, tricks will become more difficult and inaccurate. Don't be alarmed; this does not imply that you must purchase a new deck of cards right now. A fresh roll of griptape may frequently do wonders.

The most effective method of removing worn-out griptape is to use a hair drier. Due to the heat, the adhesive is liquefied, making it possible for the griptape to be easily peeled off. Then you can simply add another layer of grip tape to finish the job.

You should constantly make sure that your shoes are clear of dirt and filth before skating in order to maintain your griptape in excellent condition. Without doing so, the griptape will be ground into the surface, not only creating unattractive markings but also decreasing the resistance and friction. If you do wind up with filthy griptape, you may gently clean your board using a shoe brush or a home cleaning brush that you are already familiar with. Just ask your parents; there's certain to be one lurking around someplace in your home at this point.

3. APPLICATION OF GRIPTAPE TO THE DECK AND PREVENTION OF BUBBLES

When applying your griptape, it is important to apply the sheet in tiny increments in order to prevent creating bubbles. This will prevent air from being trapped between the griptape and the deck. If, despite your efforts, little bubbles appear, you may easily remedy them by piercing a small hole in the bubble with your griptape cutter, enabling the trapped air to escape.

It is also possible to apply an anti-bubble grip tape if all of this sounds a little too difficult for your liking. In this instance, constant perforation in the griptape guarantees that no bubbles may develop throughout the application process. It is quite easy for extra air to escape between the deck and griptape due to the little holes in the tape that have been created.

Other Post:

How heavy is a skateboard?

How to skateboard uphill?

0
0 ratings